Sliding pocket door system for two parallel doors disappearing into the same pocket

As it crosses the pocket door in all its width, it permits to solidly link the pocket with the stop jambs, thus making the assembly easier.

Lets you change the door size without removing the door panel.

It joins the counterframe (50x25 mm) with the wall becoming an integral part of it, thus offering an increasing grasp of the laster. The finished wall won’t have faults.

Made of doubled-up metal sheet, bent so that they form a single body with the solid wall. They ensure greater resistance in what would otherwise be a weak point in the counterframe where cracks in the plaster could begin to form, as it is the furthest point from the wall studs.

This is quickly applied directly to the counterframe with no need to drill the floor.

Thickness 0.7 mm. The bosses are reliefs that prevent any deformation in the sheet. They are a guarantee of great robustness and rigidity.

Located on the metal upper horizontal bar. It helps to absorb any movement in the structure.

It is always possible to substitute worn mechanisms and to add accessories.

Made of coupled metal sheet and wood; the steel avoids any problems of deformation, while the wood facilitates the application of the jamb to the upright.

For joining the overboarding mesh to the counterframe: avoids the onset of rusting and potential detachment from the mesh.

16 horizontal bars attached to the plasterholding mesh lends great resistance and rigidity to the counterframe, so that it can effectively counter the tension generated by brickwork and solid walls. Robustness is fundamental as the frame effectively replaces a portion of the wall. There are 32 bars with double leaf.

They guarantee long lasting, smooth and silent action. Standard door’s weight is 100 Kg.

This is quickly applied directly to the counterframe with no need to drill the floor.

Lets you change the door size without removing the door panel.

Made of doubled-up metal sheet, bent so that they form a single body with the solid wall. They ensure greater resistance  to lateral pressures.

Made of coupled metal sheet and wood; the steel avoids any problems of deformation, while the wood facilitates the application of the jamb to the upright.

As it crosses the pocket door in all its width, it permits to solidly link the pocket with the stop jambs, thus making the assembly easier.

12 for the stud wall version made in 7/10 galvanized steel, with a dovetail form which grant an increased strength to lateral pressures (in order to have an un-deformable internal passage). There are 24 bars with double leaf.

They guarantee long lasting, smooth and silent action. Standard door’s weight is 100 Kg.

Horizontal bar made of metal (rather than wood or PVC) increases the robustness against increased load from above.

It is always possible to substitute worn mechanisms and to add accessories.