Search
Luce

Lighting up eviroments and space saving

FIND DEALER Supports

Wiring ready pocket door system

Convenience and comfort beyond space

Luce represents the essence of ECLISSE experience and know-how: the first counterframe on the market that allows the installation of light spots, thermostats, switches and telephone wiring in the same wall where it is hosted.

Decorating in full freedom: no more constraints for light points

Thanks to Luce patented system, the wall accommodating the counterframe becomes available for full-scale illumination in terms of functionality and aesthetics. A small revolution allowing for greater freedom in furnishing.

Why ECLISSE

Different systems for your business and for your needs.

Learn more

Size Guide

A wide range of systems. Find your best pocket doors. 

Learn more

Purchase ECLISSE

Choose the best way to buy our products close to you.

Find dealer

What you should know

Luce counterframes can be combined with all the models of ECLISSE door range as well as to any standard sliding door panel available worldwide.


 

Luce Single SOLID WALL version

Luce

Solid wall version

Protruding close plaster mesh

It joins the counterframe (50x25 mm) with the wall becoming an integral part of it, thus offering an increasing grasp of the laster. The finished wall won’t have faults.

Weld-free connection system (patented)

For joining the overboarding mesh to the counterframe: avoids the onset of rusting and potential detachment from the mesh.

Extractable track system (patented)

It is always possible to substitute worn mechanisms and to add accessories.

Certified runners with ball bearings

They guarantee long lasting, smooth and silent action. Standard door’s weight is 100 Kg.

Stopped embossed metal sheet

Thickness 0.7 mm. The bosses are reliefs that prevent any deformation in the sheet. They are a guarantee of great robustness and rigidity.

16 horizontal reinforcing bars

16 horizontal bars attached to the plasterholding mesh lends great resistance and rigidity to the counterframe, so that it can effectively counter the tension generated by brickwork and solid walls. Robustness is fundamental as the frame effectively replaces a portion of the wall. There are 32 bars with double leaf.

Vertical reinforced bars (solid wall version)

Made of doubled-up metal sheet, bent so that they form a single body with the solid wall. They ensure greater resistance in what would otherwise be a weak point in the counterframe where cracks in the plaster could begin to form, as it is the furthest point from the wall studs.

Self-centring door runner - solid wall

This is quickly applied directly to the counterframe with no need to drill the floor.

Under frame tear-off profile (patented)

Works on the same opening principle as cans: the base of the counterframe is removed to make the most of the space below when there is a difference in height between the counterframe installed and the finished floor.

Insertion system for electric box (patented)

If required, it is possible to install up to 10 electrical boxes in each panel (5 on one side and 5 on the other).

Wooden or steel top jamb

Made of coupled metal sheet and wood; the steel avoids any problems of deformation, while the wood facilitates the application of the jamb to the upright.

Alignment bar (patented) - solid wall

As it crosses the pocket door in all its width, it permits to solidly link the pocket with the stop jambs, thus making the assembly easier.

Adjustable rear door stop

Lets you change the door size without removing the door panel.

Luce Single STUD WALL version

Luce

Stud wall version

Certified runners with ball bearings

They guarantee long lasting, smooth and silent action. Standard door’s weight is 100 Kg.

Metal upper bar

Horizontal bar made of metal (rather than wood or PVC) increases the robustness against increased load from above.

Extractable track system (patented)

It is always possible to substitute worn mechanisms and to add accessories.

12 horizontal reinforcing bars

12 for the stud wall version made in 7/10 galvanized steel, with a dovetail form which grant an increased strength to lateral pressures (in order to have an un-deformable internal passage). There are 24 bars with double leaf.

Wooden or steel top jamb

Made of coupled metal sheet and wood; the steel avoids any problems of deformation, while the wood facilitates the application of the jamb to the upright.

Vertical reinforced bars (stud wall version)

Made of doubled-up metal sheet, bent so that they form a single body with the solid wall. They ensure greater resistance  to lateral pressures.

Self-centring door runner - stud wall

This is quickly applied directly to the counterframe with no need to drill the floor.

Channel for electrical wiring

Galvanised steel channel where to insert electrical wiring, equipped with earth cable.  

Alignment bar (patented) - stud wall

As it crosses the pocket door in all its width, it permits to solidly link the pocket with the stop jambs, thus making the assembly easier.

Adjustable rear door stop

Lets you change the door size without removing the door panel.