Sliding pocket door system for double door

It is always possible to substitute worn mechanisms and to add accessories.

They guarantee long lasting, smooth and silent action. Standard door’s weight is 100 Kg.

As it crosses the pocket door in all its width, it permits to solidly link the pocket with the stop jambs, thus making the assembly easier.

For joining the overboarding mesh to the counterframe: avoids the onset of rusting and potential detachment from the mesh.

Works on the same opening principle as cans: the base of the counterframe is removed to make the most of the space below when there is a difference in height between the counterframe installed and the finished floor.

This is quickly applied directly to the counterframe with no need to drill the floor.

Made of doubled-up metal sheet, bent so that they form a single body with the solid wall. They ensure greater resistance in what would otherwise be a weak point in the counterframe where cracks in the plaster could begin to form, as it is the furthest point from the wall studs.

Located on the metal upper horizontal bar. It helps to absorb any movement in the structure.

16 horizontal bars attached to the plasterholding mesh lends great resistance and rigidity to the counterframe, so that it can effectively counter the tension generated by brickwork and solid walls. Robustness is fundamental as the frame effectively replaces a portion of the wall. There are 32 bars with double leaf.

It joins the counterframe (50x25 mm) with the wall becoming an integral part of it, thus offering an increasing grasp of the laster. The finished wall won’t have faults.

Lets you change the door size without removing the door panel.

Thickness 0.7 mm. The bosses are reliefs that prevent any deformation in the sheet. They are a guarantee of great robustness and rigidity.