Search
Unilateral

Two independent sliding pocket doors into the same pocket

OVERVIEW
ECLISSE sliding pocket door system

Customized environments with a single solution

Optimizing space for two sliding doors. Is it possible?

ECLISSE Unilateral is the solution that allows two opposite doors to slide into the same pocket. Thus, you have the chance to exploit even the tightest spaces to close two separate, distinct rooms: in the opening phase the two door panels take the space of a single wall section.

Exploit the most confined spaces, such as hallways and entrances

When you need to maximize space with the smallest footprint, ECLISSE Unilateral is the most indicated counterframe: it offers the possibility to host two independent sliding pocket doors within a single pocket, for a functional and stylish design.

ECLISSE sliding pocket door system
ECLISSE sliding pocket door system

Learn the benefits of Unilateral

  • Enhanced usability of environments.

  • Total usage of the available square footage.

  • More opportunities to furnish the spaces.

  • A single counterframe to install.

Why ECLISSE

Different systems for your business and for your needs.

Learn more

 

Size Guide

A wide range of systems. Find your best pocket doors.

Learn more

 

Purchase ECLISSE

Choose the best way to buy our products close to you.

Find dealer

FEATURES

What you should know

ECLISSE Unilateral is supplied with passage size ranging from 600+600 to 1000+1000 mm in width and from 1000 to 2600 mm in height, both in the solid wall and in the stud wall version.

 

ECLISSE Unilateral SOLID WALL version

Unilateral

Solid wall version

Alignment bar (patented) - solid wall

As it crosses the pocket door in all its width, it permits to solidly link the pocket with the stop jambs, thus making the assembly easier.

Extractable track system (patented)

It is always possible to substitute worn mechanisms and to add accessories.

Protruding close plaster mesh

It joins the counterframe (50x25 mm) with the wall becoming an integral part of it, thus offering an increasing grasp of the laster. The finished wall won’t have faults.

Stopped embossed metal sheet

Thickness 0.7 mm. The bosses are reliefs that prevent any deformation in the sheet. They are a guarantee of great robustness and rigidity.

16 horizontal reinforcing bars

16 horizontal bars attached to the plasterholding mesh lends great resistance and rigidity to the counterframe, so that it can effectively counter the tension generated by brickwork and solid walls. Robustness is fundamental as the frame effectively replaces a portion of the wall. There are 32 bars with double leaf.

Weld-free connection system (patented)

For joining the overboarding mesh to the counterframe: avoids the onset of rusting and potential detachment from the mesh.

Vertical reinforced bars (solid wall version)

Made of doubled-up metal sheet, bent so that they form a single body with the solid wall. They ensure greater resistance in what would otherwise be a weak point in the counterframe where cracks in the plaster could begin to form, as it is the furthest point from the wall studs.

Self-centring door runner - solid wall

This is quickly applied directly to the counterframe with no need to drill the floor.

Under frame tear-off profile (patented)

Works on the same opening principle as cans: the base of the counterframe is removed to make the most of the space below when there is a difference in height between the counterframe installed and the finished floor.

Polystyrene joint

Located on the metal upper horizontal bar. It helps to absorb any movement in the structure.

Certified runners with ball bearings

They guarantee long lasting, smooth and silent action. Standard door’s weight is 100 Kg.

Wooden or steel top jamb

Made of coupled metal sheet and wood; the steel avoids any problems of deformation, while the wood facilitates the application of the jamb to the upright.

Adjustable rear door stop

Lets you change the door size without removing the door panel.

ECLISSE Unilateral STUD WALL version

Unilateral

Stud wall version

Alignment bar (patented) - stud wall

As it crosses the pocket door in all its width, it permits to solidly link the pocket with the stop jambs, thus making the assembly easier.

Certified runners with ball bearings

They guarantee long lasting, smooth and silent action. Standard door’s weight is 100 Kg.

12 horizontal reinforcing bars

12 for the stud wall version made in 7/10 galvanized steel, with a dovetail form which grant an increased strength to lateral pressures (in order to have an un-deformable internal passage). There are 24 bars with double leaf.

Vertical reinforced bars (stud wall version)

Made of doubled-up metal sheet, bent so that they form a single body with the solid wall. They ensure greater resistance  to lateral pressures.

Self-centring door runner - stud wall

This is quickly applied directly to the counterframe with no need to drill the floor.

Metal upper bar

Horizontal bar made of metal (rather than wood or PVC) increases the robustness against increased load from above.

Extractable track system (patented)

It is always possible to substitute worn mechanisms and to add accessories.

Vertical reinforced bars (stud wall version)

Made of doubled-up metal sheet, bent so that they form a single body with the solid wall. They ensure greater resistance  to lateral pressures.

Adjustable rear door stop

Lets you change the door size without removing the door panel.

Accessories
Icona_Torna_Su